The group leaded by P. Artal at Murcia University has recently published an interesting paper related to adaptive optics using an adaptive lens. When working in a real scenario, imperfections in the optical elements you use or just the objects you want to image introduce optical aberrations in the pictures you obtain. Usually these aberrations reduce the quality of your images just a bit (introducing a bit of defocus or some astigmatism), but in the worst case scenario it may result in completely useless results.
In order to overcome this problem, usually liquid crystal spatial light modulators or deformable mirrors are used in optical systems to introduce phase corrections to the light going through the system, countering the phase of these aberrations and thus restoring the image quality. However, these systems present several problems. Even though both spatial light modulators and deformable mirrors can correct the problems I mentioned earlier, they work in a reflection configuration. This introduces additional complexity to the optical systems. Also, liquid crystal spatial light modulators are sensitive to polarization, usually have low reflectance values, and tend to be slow.
As a way to tackle those obstacles, the authors have used an adaptive lens in a two-photon microscope to perform the adaptive optics procedure. Adaptive lenses are being used more and more recently to perform aberration correction. In contrast to both spatial light modulators and deformable mirrors, they work in transmission and present very low losses. Moreover, they can introduce low and mid-order aberrations at refresh rates of almost 1 kHz. The working principle can be seen in this figure:
In the paper, they show how this device can obtain results comparable to the traditional spatial light modulator approach, with the benefits mentioned before, in a multi-photon microscope.
Wavefront correction in two-photon microscopy with a multi-actuator adaptive lens
by Juan M. Bueno et al., at Optics Express
A multi-actuator adaptive lens (AL) was incorporated into a multi-photon (MP) microscope to improve the quality of images of thick samples. Through a hill-climbing procedure the AL corrected for the specimen-induced aberrations enhancing MP images. The final images hardly differed when two different metrics were used, although the sets of Zernike coefficients were not identical. The optimized MP images acquired with the AL were also compared with those obtained with a liquid-crystal-on-silicon spatial light modulator. Results have shown that both devices lead to similar images, which corroborates the usefulness of this AL for MP imaging.